# How to activate call recording in VOIPnow

## Important Notes

Calls will only be recorded if they pass through our system, so in the case of MS Teams it will not record Teams to Teams meetings.

## Configuration Steps

1.  Log into our VoIPNow website at [https://sip01.mhn.net.au/](https://sip01.mhn.net.au/login_up.php) using your management credentials

![](/files/GYsfIdvyfEdlGeT4dsVb)

2\. Click on "Extensions" in the menu on the left and navigate to the extension you want to enable the call recording

![
](/files/ecGqahGTHm28ZCGG1jL3)

3\. Click on the button named "Phone Terminal Setup"

![](/files/5wiTDLcEzUW7Fynqt7tH)

4\. Once clicked you may be able to see the below page and scroll down until you see the "Call Recording" section. Tick the box next to "Call recording function enabled" and Set the "Record triggered" option to "All calls are recorded" and set the auto-delete option to 14 days (this is our recommended amount but you can set it higher)

![](/files/SXzEN6ogpBXjYPwMgxso)

5\. Scroll to the right bottom of the page and hit the OK button to save the settings

![](/files/VPq08TWnAq7mJgSFzqGv)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://kb.hostednetwork.com.au/support/services/voice-over-ip-voip/general/voipnow-guides/how-to-activate-call-recording-in-voipnow.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.