LogoLogo
Partner Portal Login
  • Welcome
  • Getting Started
    • Becoming A Partner
    • Getting Support
      • Community Services
        • SMTP Servers
        • DNS Servers
      • Service Status and Incidents
        • Status Page
        • nbn Incident Notifications
    • Accounts & Billing
      • Billing Overview
      • How to pay
  • Services
    • Connectivity
      • nbn TC4
        • Getting Started
        • Troubleshooting
          • nbn Self-Diagnostic Tool
        • Technical References
          • nbn TC4 Sevice Classes
          • nbn TC4 AVC-ID
      • nbn Enterprise Ethernet
        • Getting Started
      • Internet Services
        • IP Geolocation
        • Troubleshooting
          • Advanced Troubleshooting
            • nbn Enterprise Ethernet
            • Telstra Ethernet Access and AAPT Fibre
            • nbn TC4 Connectivity
              • FTTP (Fibre to the Premise)
              • FTTN/B (Fibre to the Node/Basement) or VDSL2
              • FTTC (Fibre to the Curb)
              • HFC (Hybrid Fibre Coaxial)
              • Wireless
          • Logging a fault for your WAN Service
          • WAN Diagnostic Tool
          • WAN Monitoring
        • Technical Reference
          • What is CGNAT and How does it work?
          • Ethernet Service Shaping Requirements
          • Router configuration for Telstra 4G/5G services
      • SD-WAN
        • Getting Started
          • How to login to Antares V2 Portal
          • Getting Familiar with Antares Portal
      • Requesting co-managed router access
    • Voice over IP (VoIP)
      • Best Practices to Protect You from Toll Fraud
      • Best Practice Guidelines
      • Inbound Numbering System
        • How to access the Inbound Numbering System?
        • Creating a new user
        • Diverting a 1300/1800 number
        • Moving a DID between services
        • Creating a basic IVR
      • Grandstream Device Management System (GDMS)
        • How to login to the GDMS platform
        • How to run diagnostic tests within the GDMS
        • How to add a site and move a VoIP Device into it
        • How do I add/remove users from the GDMS Portal?
      • 3CX Guides
        • How to configure our CTS Trunk on 3CX
        • Resolving Call Quality issues on 3CX deployments
        • How to configure a SIP Trunk on 3CX
        • Changes to default 3CX Headers
      • Microsoft Teams Direct Routing
        • Getting Support for Microsoft Direct Routing
        • Configuration Guide
        • Troubleshooting Call Routing
        • Unable to Dial Internationally from Teams
        • Creating a resource account and assigning a Direct Routing DID
        • "Call cannot be connected" error with Auto-Attendants and Queues
        • Creating Dial Plans to Prefix Outbound Calls
      • Brand Specific Guides
        • NetComm Router/ATA
          • How to register VOIPnow extension to NetComm device (NL1901ACV)
        • Cisco
          • SPA112 - Fax Settings
        • Grandstream
          • How to enable TLS encryption on Grandstream phone
          • Upgrading the firmware on Grandsteam phones
          • Setting up voicemail on the DP720 (Cordless Handset)
          • How to setup a VoIP Account on a Grandstream phone
          • Grandstream GXP2140 Voicemail
          • Setting up Monitored Call Parking
      • General
        • Getting Started with your VoIP Reseller Account
        • How much bandwidth do I need for VoIP?
      • VoIP Troubleshooting
        • VoIP Troubleshooting Guide
        • VoIP Fault Guide
        • SIP ALG and turning it off
        • Emails from VoIPNow going to SPAM
      • Number Porting
        • Can I port my existing phone numbers over?
        • How do I port numbers over to Hosted Network?
        • Reasons for Number Port Rejection
      • VoIPNow Guides
        • How to activate call recording in VOIPnow
        • Configuring Charging Plans to add margin to outbound calls
        • Configuring Charging Plans to add margin to 13/1300/1800 Inbound calls
        • What is a valid Caller ID?
        • How can I make Anonymous Calls?
        • Getting a breakdown on the resources for an Organization
        • Configuring Fax to Email
        • VoIP Bundle Creation & Implementation
        • Uploading Sound files to VoIPNow
        • How does Call Parking work on VoIPNow?
        • Transferring Calls Waiting in Queues
        • How to setup a Queue (Hunt Group)
        • How to find a list of all the numbers assigned to your Service Provider account
        • How to do a context jump based on the incoming Called DID
        • How to change Music on Hold for an extension
        • Creating and updating a time interval
        • How to apply a time interval to an Incoming Call Rule
        • How to add an Incoming Caller ID Prefix with an IVR
        • Applying sound files to an IVR
        • How to configure an IVR to transfer to an external number
        • How to enable International Call barring on Organizations and Users
        • List of the common issues submitted by the partners
        • How to Configure BLF on Virtual Multi-Purpose Key
        • How to configure Intercom/Paging
        • How to configure TLS and SRTP on VOIPnow and Grandstream Phones
        • How to give end customer an access to VOIPnow to view/manage the CDR and Call recordings
      • SIP Trunk Requirements: Ports, Protocols, and Codecs
    • Cloud
      • Infrastructure as a Service
        • Getting Started
          • How to login to vCloud Director
          • vCloud Resource Allocation
        • Virtual Machines & vApps
          • Creating a new Virtual Machine
          • What is a vApp and how to create one?
          • Mounting an ISO to a VM
          • Accessing the VM console
          • Using VM snapshots
          • Converting a VM to a Template
        • Backup and Restorations
          • Accessing Veeam Self Service Backup Portal
          • Creating a Backup Job
          • Enabling Application-Aware Processing in Veeam Self-Service Portal
          • Setting up Guest Processing
          • How to start a File Level Restore
          • How to carry out a full VM restore
          • Archived: Restoring a VM or guest files
        • Networking
          • Routed, Isolated and Direct networks in vCloud
          • How to create/delete a vApp network
          • How to create/delete a new Organization level network
        • Administrative Tasks
          • Creating Users
          • What is a 'Catalog' and how to create one
          • Uploading ISO files or OVA/OVF templates
          • Setting up Azure AD SAML based authentication for vCloud
          • Microsoft Software Licensing
          • Activating Windows Servers
          • Checking and Decreasing IaaS resources
      • Backup as a Service
        • Tenant Management via VSPC
          • VSPC Overview
          • Creating Companies
          • Adjusting tenant storage allocation
        • Configuration with Veeam B&R
          • Getting Started
          • Configuring Backup Jobs
          • Configuring Backup Copy Jobs
            • Seeding Backup Copies
        • Configuration of Veeam Agents via VSPC
          • Getting Started
          • Installing Agents
          • Using backup policies
      • Disaster Recovery as a Service
        • Getting Started
        • Configuring Replication Jobs
        • Seeding Replicas
        • Failover
          • Partial Failover
          • Full Site Failover
          • Accessing replica VMs
  • Partner Portal
    • General
      • Manage Contacts
      • How to cancel services in the Partner Portal
    • Rebilling System
      • End Customers Management
        • Services
        • Recurring and Once-Off Charges
      • Charging Plans
      • Rebilling Configuration
        • Integrations
        • Integration Errors
        • Email Settings
        • Product Settings
        • Bank Account
        • Invoice Details
    • Service Qualifications
      • How perform a WAN Service Qualification
      • WAN Service Qualifications Drafts
      • WAN Service Qualification History
      • FTTP Upgrade
    • Security
      • Multi-Factor Authentication
      • Microsoft Single Sign-On (SSO)
      • Account Permissions
Powered by GitBook
On this page
  • Overview
  • How does vCloud calculate resource usage?
  • What can I do to avoid my VMs being impacted?
  1. Services
  2. Cloud
  3. Infrastructure as a Service
  4. Getting Started

vCloud Resource Allocation

A high-level overview of the VMware vCloud platform's resource allocation and how VMs consume purchased resources

Overview

Hosted Network's VMware vCloud (IaaS) platform partitions purchased resources into Virtual Datacenters, which are typically dedicated to a single end customer, which allows partners to easily manage and monitor their customer VMs.

You can think of these Virtual Datacenters as "Resource Pools", they behave similar to a physical ESXi host in the way CPU or RAM is managed. If you try to exceed the amount of resources assigned to the pool you will eventually hit performance issues (e.g. packet loss, latency, slugishness) as the VMs will fight for resources.

This is why it's generally a good idea to allocate additional CPU/RAM to prevent issues with running out of resources and impacting the end-user experience, it will also allow the VMs to burst higher than their allocated resources should they need to.

How does vCloud calculate resource usage?

vCloud allocates CPU slightly different to the way RAM and Storage is allocated. Specifically it calculates that 1 vCPU Core equals 1Ghz, so for every core you allocate to a VM it will deduct 1Ghz from the resources allocated to your Resource Pool/Virtual Datacenter. Whereas RAM and Storage are allocated in a direct 1:1 relation, so 1GB of RAM or Storage is the same as with a physical server or similar VM.

This vCPU allocation is used as an overcommit control within the vCloud platform and underlying infrastructure, it doesn't stop the VM from going above this 1Ghz per vCPU so if it has 4 vCPU and is running on a VMware host with 2.5Ghz cores it can use a total of "10Ghz" instead of "4Ghz".

However if the VMs within a resource pool exceed the allocated CPU resources vCloud will start to rate-limit the VMs in an attempt to avoid you using more than you have purchased and prevent other workloads from being impacted. This is more obvious with smaller Virtual Datacenters as the VMs will easily burst over the allocated resources.

What can I do to avoid my VMs being impacted?

Hosted Network engineers can assist you with avoiding your VMs being impacted by bursty workloads on other VMs in your Virtual Datacenter by changing some settings on your behalf. Specifically, the below settings can be modified:

  • CPU Share Priority - This setting specifies the priority of VMs that get access to CPU resources. A VM with a higher priority is able to take resources away from other VMs if the VM requires it. The shares are typically specified as "High", "Normal" and "Low".

  • CPU Reservation - This sets a baseline that the VM is guaranteed to have if the Virtual Datacenter is out of resources. For example if you have a total of 2Ghz CPU assigned and it is split between two VMs (each having 1Ghz reserved), they are both guaranteed to have at minimum of 1Ghz. But if one is only using 500Mhz then the other can use up to 1.5Ghz

  • CPU Limit - This is the opposite to CPU Reservation, it sets an upper limit on the CPU usage that the VM cannot exceed. So if you limit a VM to only using 2Ghz max it will never be able to go past this.

You can use all of the above together to impose lower and upper limits on the VMs and guarantee resources in varying situations. e.g. setting a minimum amount of CPU resources while not allowing a VM to go above a certain amount as well, reducing unexpected performance issues for occurring.

PreviousHow to login to vCloud DirectorNextVirtual Machines & vApps

Last updated 8 months ago